Multi-colour Stair Light Controller

Multi-colour Stair Light controller features:

• Multiple function PIR sensor stair light controller with daylight sensor.

• 32 channels constant voltage output drive

• 5 – 24 V DC, Max. 1 A current per channel

• Dual SPI (TTL) signal output. Compatible with 27 type Integrated Circuit (IC) digital RGB addressable LED strips (see detailed list below). Learn more about addressable LED s here.

• Easy operation with OLED display and 3 buttons

• Four main operation modes

• Two controllers can be connected for dual-cascading operation

• Multiple colour modes

• Adjustable speed and brightness

• Fast self-testing function

• Damaged CV channels can be disabled

• Certifications: CE, UKCA, FCC, IC, RoHS

• Warranty: 2 years

What you’ll need, in addition is compatible lights and power supply.

LED light compatibility

Constant voltage (CV) LED lights:

• Dimmable

• Single colour

• 5-24 V DC

• Maximum 1 A per channel

SPI (TTL) signal output (addressable pixel RGB LED):

• TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811,WS2812, TM1829, TM1914A, GW6205, GS8206, LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822

Power supply compatibility

• The unit can be controlled within the +5V - +24V DC voltage range. Using the device with a power source outside of this range can cause the controller unit to malfunction.

• Port type: 2-pole terminal block

• Recommended voltage: +5V, +12V, +24V DC voltage

• It is recommended to use a switched-mode power supply.

• The connected power supply needs to provide a steady DC voltage and the maximal electrical current required by the unit and the connected LED lights

• Ensure sufficient voltage is available to drive the pixel RGB LED strips. Depending on the type and length of LED strips you’re using, you might need multiple power injections for the LED strips (both ends and middle)

Multi-colour Stair Light Controller videos

Promo video

Operation modes

Installation guide

Important notes on installation and warranty!

All electrical works must be carried out by a fully qualified, registered electrician. Please note that we are unable to refund or replace any item deemed faulty unless it has been installed by a fully qualified electrician. When returning a faulty item we require full details of the installing electrician in order to verify the integrity of both the installation and electrical wiring system including fuse board and circuit protection devices.

 What’s included in the stair light kit:

• Multi-colour stair light controller

• 2 x standard PIR Motion sensors and 2 x narrow detection angle PIR sensor

• 2 x 5 m motion sensor extension cable

• Daylight sensor (with 30 cm cable)

• User manual

5 meter extension cable for motion sensors

Can be used with both narrow and wide-range type of sensors.